Polymer Lithium Batteries For Big Capacity Power Bank

Item No.: 00301
Polymer lithium-Ion cell 4Ah 936060 3.7v for big capacity power bank safety test method and standard due to more stringent regulations in dealing with dangerous goods
Description
Description

Polymer Lithium-Ion Cell 4Ah 936060 3.7v For Big Capacity Power Bank

 

Specification For Polymer Lithium-Ion Cell 4Ah 936060 3.7v For Big Capacity Power Bank

 

No. Items Specification Remark
1 Nominal Capacity 4Ah 0.2C Standard discharge
2 Nominal Voltage 3.7V Mean Operation Voltage
3

Voltage at end of Discharge 

3.0V

Discharge Cut-off Voltage 

4 Charge Voltage 4.2V±0.03V By standard charge method
5 Cell Internal Impedance ≤300Ω  
6 Maximum charge current 30C For continuous charging mod
7 Maximum discharge current 50C For continuous discharge mod
8

Operation Temperature Range 

Charge:0~45℃
Discharge:-20~60℃

60±25%R.H.
Bare Cell

9

Storage Temperature Range

Less than 1 year: -20~25℃
Less than 3 months: -20~40℃

60±25%R.H.
at the shipment state

10

Weight 

Approx: 8g 

Finished Cell
11

Pack Dimension

Height 60mm*Width60mm Thickness 9.3mm

Initial Dimension 

 

 

Safety Test Method And Standard

 

Due to more stringent regulations in dealing with dangerous goods, Tac make the safe test follow UN38.3

and submit the MSDS UN38.3 when the cargo shipped out for most LP battery

 

Item 

Battery

Condition

Test Method

Requirements 

Crush

 

Fresh,

Fully charged

Crush between two flat plates. Applied force is about 13kN(1.72Mpa) for 30min.

No explosion,

No fire 

Short

Circuit 

Fresh,

Fully charged

Each test sample battery, in turn, is to be short-

circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.Tests are to be conducted at room temperature(20±2℃ ).

No explosion,

No fire The Temperature of the surface of the Cells are lower than 150℃ 

Short

Circuit

 

Fresh,

Fully charged

Each test sample battery, in turn, is to be short-

circuited by connecting the (+) and (-) terminals of the battery with a Cu wire having a maximum resistance load of 0.1Ω.Tests are to be conducted at temperature(60±2℃ ). 

No explosion,

No fire The Temperature of the surface of the Cells are lower than 150℃ 

Impact

 

Fresh,

Fully charged

 

A 56mm diameter bar is inlayed into the bottom of a 10kg weight. And the weight is to be dropped from a height of 1m onto a sample battery and then the bar will be across the center of the sample.

No explosion,

No fire

 

Forced

Discharge 

Fresh,

Fully charged

Discharge at a current of 1 C5A for 2.5h.

No explosion,

No fire

Nail

Pricking

 

Fresh,

Fully charged

 

Prick through the sample battery with a nail having a diameter of 3mm and remain 2h.

 

No explosion,

No fire

 

 

Packing for Polymer Lithium-Ion Cell 4Ah 936060 3.7v For Big Capacity Power Bank

Due to avoid short circle, we pack the batteryby specially plastic palltet

20pcs for one pallet and 8pallets for one standard paper carton.

 

The outer carton stick UN Lithium-ion label with internation transportation rules

 

 

Handling of Cells

 

Consideration of strength of film package 

Soft Aluminium foil

Easily damaged by sharp edge parts such as pins and needles, Ni-tabs, comparing with metal-

can-cased LIB.

 

Sealed edge may be damaged by heat above 100°C, bend or fold sealed edge.

 

Prohibition short circuit

 

Never make short circuit cell. It generates very high current which causes heating of the cells

and may cause electrolyte leakage, gassing or explosion that are very dangerous.

 

The LIP tabs may be easily short-circuited by putting them on conductive surface.

Such outer short circuit may lead to heat generation and damage of the cell.

 

An appropriate circuitry with PCM shall be employed to protect accidental short circuit of the

battery pack.

 

Mechanical shock

LIP cells have less mechanical endurance than metal-can-cased LIB.

Falling, hitting, bending, etc. may cause degradation of LIP characteristics.

 

Handling of tabs

 

The battery tabs are not so stubborn especially for aluminum tab.

Don’t bend tab.

Do not bend tabs unnecessarily.

 

 

Similar Polymer Battry Picture for LiPO battery 3.7V 16AH High power 20C discharge li-ion battery for UAV

 

Other size:

Tac submit over 2000 models for different capacity and size 

       MODEL CAPACITY T W H
  506786MP-3500     3500   6  5.08 66.88  86.62
 9645100MP-4800     4800 3.5  9.25 44.64  99.95
 4674135MP-5000     5000   5  4.64 73.68 134.53
  114295MP-5600     5600   5 11.27 41.45  95.08
  887780MP-6000     6000   5  8.46 76.23   79.1
 1145100MP-6000     6000 2.2  11.3 43.49 100.52
 9545120MP-6500     6500 2.0  9.39 44.53 120.75
  956497MP-6900     6900 3.2  9.36  62.6  95.75
 8843156MP-7700     7700 2.2  9.02 43.97 159.31
 8060155MP-8300     8300 2.0  7.82  58.9 156.88
9759156MP-10000     10000 2.2  9.37 58.85 155.77
7270170MP-10000     10000 2.2  6.88 69.98 169.87
9559156MP-11000     11000 2.2  9.47 58.83  157.5
Send your message to us
ver_code